If you're interested in ordering one of these boxes, contact me (Richard Stauffacher) via email.
The box is made of 3/4 inch Medium Density Fiberboard (MDF), and will be shipped disassembled via UPS (or other carrier) in three packages. This means that you will have to screw in about 50 screws. Holes will all be pre drilled and screws included. Exterior surfaces will have paint on them and interior surfaces are unpainted. It is imperative that all of the box's joints are sealed, otherwise rosin dust will be blown through the gaps, so after the box is assembled it is recommended that you spackle the 8 edges where the sides and bottom of the box join together and give it a final coat of paint.
Cost of box is $225.00. Shipping and handling (from Arkansas) usually
runs from appox. $60.00 to $100.00. Contact Richard through email link
at the top of this page. US only.